NT-USB+

The NT-USB+ is a professional-grade USB microphone with next-generation features for recording exceptional audio directly to a computer or mobile device.


Discover everything you need to know about using your NT-USB+ here.

NT-USB+ feature points
  1. 电容式音头
  2. 状态灯
  3. 金点(话筒前面)
  4. 安装螺纹
  5. USB-C 连接器
  6. 可拆卸噗声滤除器
  7. 监听混音控制
  8. 耳机音量控制
  9. 3.5 毫米耳机输出
  10. 环形底座
  11. 桌面支架

Note

When using the NT-USB+ with recording software or a communications app, check that it is set as your input and output device in the software.

Note

When plugged into your device, the NT-USB+ will automatically be set as both its microphone input and headphone output. Make sure the volume on your device is turned all the way up and use the headphone level control on the microphone to set the output level. The microphone input level can usually be set in the audio or video app you are using, such as RØDE Reporter.

Note

While recording or streaming, we recommend turning this control fully clockwise and disabling any software monitoring in your DAW (Digital Audio Workstation) or streaming software. This will ensure you won’t hear a distracting echo created by listening to the direct monitoring signal and the delayed signal from your computer at the same time.

Note

When used with RØDE Connect, the monitor mix control on your NT-USB+ will be disabled and automatically set to the fully clockwise position. This means you’ll hear your microphone audio at full volume, with no latency (see 'Monitor Mix Control' section for more information).